Skip to content

12-70V battery capacity indicator



Price French Monkeys
31,90 €


Delivery: 2 to 3 working days





ID:





   Description ──────────────────────────
Battery capacity indicator with built-in voltage indicator.
It is configurable for 12V, 24V or 48V batteries of lead, lithium ion, lithium iron phosphate, NiMH technologies.

The indicator is configured with all the information described in the manual to indicate the battery capacity.


The display precision is 1%, the indication is on 3 digits.
The operating range is 7V to 70V.
Low consumption less than 15mA.
The indicator is connected by 2 wires to the + and - of the battery.
Recessed hole dimensions: 45mm x 26mm
Total dimension: 48mm x 29mm x 28mm
Operating temperature: -10 ° C to + 70 ° C
Do not have direct exposure to the sun.

Changing the configuration:

By pressing the button on the back of the indicator for 3 seconds, a menu will appear, just press quickly to go to the next selection.

You can scroll through menus 1-U, 2-b, 3-c, 4-d

1-Corresponds to the tension adjustment. To modify this parameter press 3 until the voltage is displayed.

Press 10 sec and the voltage will increase, to decrease press again for 10s.

The backup is done automatically after a certain time after blinking.

2-b allows the choice of battery technology. To modify, press for 3 sec, the 12V voltage is displayed then leave it pressed to change the configuration:

12V corresponds to the configuration for a lead-acid battery

3,7V corresponds to a lithium ion polymer battery

3,2V corresponds to lithium iron phosphate

1,2V corresponds to NiMH

The backup is done automatically after a certain time after blinking.

3-c allows you to choose the number of cells. To modify press 3 sec the number of cells is displayed.

For a lead-acid battery, choose between 1 and 10. 1 corresponds to a 12V battery, 2 to a 24V battery and so on.

For a 3,7V lithium ion polymer battery, choose between 2 and 28.

For a 3,2V lithium iron phosphate battery, choose between 3 and 32.

For a NiMH battery, choice between 10 and 70.

To change the cell number keep pressed 6 sec and the number increases. To decrease, press again for 6 sec.

The backup is done automatically after a certain time after blinking.

4-d allows to change the display mode

V% display alternately displays the voltage and the percentage of charge remaining

V display only displays voltage

V% display shows the percentage of charge remaining

The backup is done automatically after a certain time after blinking.

 

Note: The default configuration is for a lead battery so you must redo the configuration.




THEY TALK ABOUT US

our press releases for French Monkeys Shop